HIGH PERFORMANCE CUTTING TOOLS FOR AUTOMATIC LATHES AND MICROMECHANICS

APPLITEC

text

APPLITEC

Text

Cégtörténet

Text

Text

Hivatalos weboldal:

TOP-Line

The TOP-Line series offers a full range of inserts for the machining of small turned parts. The diversity of the products provides a solution matching the highest requirements and are suitable for the machining of the most difficult materials. This range is constantly evolving in order to fit perfectly the latest market needs. A TOP-Line széria a….

TOP-Line benefits

A patented clamping system with two screws and shifted teeth providing an extremely rigid clamping of the insert on the tool holder, for outstanding machining performance.
Several coatings are available, allowing significant tool life increase even when machining difficult materials.
Many grades, sizes and geometries are available in order to fit perfectly to any machine type, workpiece material and machining application.

Moreover

A full range of over 4’000 standard items, including 3’900 different types of inserts.
A wide range of tool holders with square shank starting from 6×6 up to 25×25 mm, also available with integrated coolant supply.
A large selection of specific tool holders improving machine capability.

PRO-Line

High performance turning tools for automatic lathes

The PRO-LINE series offers a wide range of inserts for the machining of small turned parts. The diversity of the products provides a cost effective solution matching high requirements.

PRO-Line benefits

A rigid full teeth contact clamping system with two screws and central positioning reinforcement providing very high machining performance and accuracy.
Several grades, sizes and geometries are available in order to fit perfectly to any machine type, workpiece material and machining operation.

Moreover

A wide range of tool holders with square shank starting from 8×8 up to 20×20 mm, also available with integrated coolant supply.
Very good value for money.

EVOCUT-Line

The EVOCUT-LINE series offers a wide range of high performance parting off tools. The cutting geometries of the inserts are designed in order to achieve highest requirements and efficient machining of the most difficult materials. First choice on Swiss type automatic lathes.

EVOCUT-Line benefits

Four different insert sizes (1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm) in order to save workpiece material by fitting perfectly to any parting off operation.
Four cutting geometries and six high performance grades, for outstanding performance in any situation.
Several coatings available for tool life improvement in all kinds of materials.

Moreover

A wide range of tool holders with square shank starting 10×12 up to 20×20 mm, also available with integrated coolant supply.
Parting off up to Ø 44 mm.

CUT-Line

Cost effective parting off tools

The CUT-LINE series offers a wide range of cost effective and high performance parting off tools. The cutting geometries of the inserts are designed in order to achieve highest requirements and efficient machining of the most difficult materials.

CUT-Line benefits

Clamping system in two versions with independent clamp part for high rigidity and efficiency.
Three different insert sizes (1.6 mm, 2.2 mm and 3.1 mm) and several grades and geometries are available in order to fit perfectly to any machine type and workpiece material.
Several coatings available for tool life improvement in all kinds of materials.

Moreover

A wide range of tool holders with square shank starting from 8×10 up to 25×25 mm, also available with integrated coolant supply.
Parting off up to Ø 65 mm.

EVO-Line

The ECO-LINE series offers a comprehensive range of inserts for the machining of small turned parts. This range provides a very cost effective solution. Some inserts can also be reground.

ECO-Line benefits

A patented single screw rigid full teeth contact clamping system with central positioning reinforcement providing high machining performance and accuracy.
Several grades, sizes and geometries are available in order to fit perfectly to any machine type, workpiece material and machining operation.
Several coatings are available, allowing tool life improvement in all kinds of materials.

Moreover

A wide range of tool holders with square shank starting from 8×8 up to 20×20 mm, also available with integrated coolant supply.

ISO-Line

The ISO-Line series offers a wide range of inserts for the machining of small turned parts. With corner radius starting R0.03 mm and sophisticated cutting geometries, this series matches highest requirements, and allows efficient machining of the most difficult materials.

ISO-Line benefits

Three types of inserts with 80°, 55° and 35° shape, with many grades, sizes and geometries in order to fit perfectly to any machine type, workpiece material and machining operation.
Several coatings available for tool life improvement in all kinds of materials.

Moreover

A wide range of tool holders with square shank starting from 8×8 up to 20×20 mm, also available with integrated coolant supply.
The universal standard range combined with Applitec high-end quality!

TRIO-Line

The TRIO-Line series is dedicated to the turning of precision small grooves. This series offers an ideal solution with rigid teeth clamping system and very wear-resistant micro-grain carbide grades.

TRIO-Line benefits

A full teeth contact rigid clamping system for perfect machining quality and finishing.
Cost-effective inserts with three cutting edges.
Four cutting geometries and two high performance grades, offering a perfect solution in any situation.

Moreover

A wide range of tool holders with square shank starting from 8×8 up to 20×20 mm.
Insert available with cutting width according DIN6799 and DIN471.

SWITCH-Line

Kis szöveg

Hosszú szöveg

SWITCH-Line benefits

felsorolás

Több

felsorolás

MODU-Line

Super rigid quick change tooling system The

MODU-LINE series is a super rigid modular tooling system, offering quick tool change and pre-setting out of the machine during running production.

MODU-Line benefits

The compact design of this system allows increasing the number of tool positions in order to enlarge the machining possibilities.
The pre-setting system ensures quick tool change, minimizing production downtime.
Fits on most of the machines made by all the leading Swiss type machine manufacturers, and also promoted by other tool makers.

Moreover

An efficient coolant system for optimized chip outflow.
A very rigid and stable quick change clamping system for outstanding machining quality and performance.

IN-Line

Micro boring bar system

The IN-LINE series offers a wide selection of boring bars with different high rigidity clamping holders. The rich diversity of products offers solutions matching highest requirements, even when machining very difficult materials. The range is under constant improvement in order to bring effective solutions to the latest market needs.

IN-Line benefits

An extremely rigid clamping system for perfect machining quality and performance.
Two boring bar sizes Ø 4mm and Ø 6mm for outstanding performance in micro machining.
Several grades, sizes and geometries are available in order to fit perfectly to any machine type, workpiece material and machining operation.
Several coatings are available, allowing significant tool life increase when machining difficult materials.

Moreover

Three different ranges of tool holders starting at Ø 10 mm up to Ø 28 mm, with different integrated coolant supply solutions, matching most difficult needs.

MICRO-Line

Milling and drilling tools for micromechanics

The MICRO-LINE series offers a wide range of milling and drilling tools for micromechanics. The rich diversity of products offers solutions matching highest requirements, even when machining very difficult materials. The range is under constant improvement in order to bring effective solutions to the latest market needs.

MICRO-Line benefits

A very wide range of precision micro end mills, finishing end mills, ball nose end mills, engraving mills and centering drills, matching the highest requirements.
Micro dills available in steps of 0.01 mm starting Ø 0.10 up to Ø 2.00 / 3.00 mm, matching perfectly all machining needs.
Several coatings are available, allowing significant tool life increase when machining difficult materials.

Moreover

Several high end grades in order to perform very high machining quality for any kind of workpiece dimensions and materials.
The confidence of a trouble free production.

TOP-Watch

High-end tools for watch making industry

TOP-Watch product line offers a full range for the production of turned watch parts. The grinding quality and the different coatings are perfectly tuned to achieve the best results by machining parts with very small diameters. The cutting edges of coated insert remain very sharp, for outstanding surface finish.

TOP-Watch benefits

Very fine ground inserts for improved surface finish and superfinishing.
A patented clamping system (TOP-Line) with two screws and shifted teeth providing an extremely rigid clamping of the insert on the tool holder, bringing outstanding machining performance and surface finish.
Different grades, sizes and geometries are available in order to fit perfectly to any machine type, workpiece material and machining operation.

Moreover

A range of high quality tool holders with square shank starting from 6×6 up to 12×12 mm, compatible with the TOP-Line system.
Several additional solutions to meet the highest requirements, like superfinishing and low vibration tool holders.

TOOLING-Line

Classic tooling for Swiss type automatic lathes

The TOOLING-LINE series offers a wide selection of traditional classic cutting tools and tool holders, always useful as an additional solution for Swiss type automatic lathes and other micro machining.

TOOLING-Line benefits

A comprehensive tooling extension for Swiss type automatic lathes for customers looking for easy traditional solutions.
High end « Applitec » carbide grades for high quality products.

Moreover

Some tools are dedicated to very specific machining operations.

JET-Line

Applitec high pressure coolant distribution system

The Applitec JET-LINE coolant distribution system is designed to maximise the benefits and advantages offered by high pressure coolant. Designed for use with our JET-Line insert holders, but not exclusivley, the quick change and flexible system reduces set up times without compomising the correct orientation and quantity of coolant flow directly to the cutting tool !

JET-Line benefits

Quick change : Reduces set up times with coolant outlets remain in the same position.
High pressure flexible reinforced hoses up to 220 bar.
Easy to adapt : Adaptors available for M5, M6, M8X1, BSP1/8 thread and more.

Moreover

Huge range of possible coolant connections to suit all machines types
A system adapted to all our holders

APPLITEC

text

APPLITEC

Cégtörténet

TOP-Line

PRO-Line

EVOCUT-Line

CUT-Line

EVO-Line

ISO-Line

TRIO-Line

SWITCH-Line

MODU-Line

IN-Line

MICRO-Line

TOP-Watch

TOOLING-Line

JET-Line

Rólunk

Szolgáltatások

Letöltések

Kapcsolat